Brady ToughStripe Nonabrasive L Shape Floor Marking Tape, 10" Length, 4" Width, Yellow (Pack of 20 per Roll)
Product details
| Management number | 225770189 | Release Date | 2026/05/09 | List Price | US$32.56 | Model Number | 225770189 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
ToughStripe "L" corner marks are made of the most durable floor marking tape. They are perfect for marking skid and pallet storage areas, as well as other designated areas of your facility. Available in 2" x 5", 3" x 8" and 4"x 10" widths in a variety of colors, including red, green, blue, yellow, black and white. Superior durability, withstands forklift traffic without tearing or lifting, low-profile design minimizes tears and scratches from skids, pallet jacks, etc., made with rugged polyester and aggressive adhesive. Painless removal, does not chip and flake when being removed - comes off in one piece, clean removal without any unsightly adhesive residue or damage to the floor. High visibility, high-gloss surface shines like new paint, low profile minimizes debris build-up along the edges that occurs with thicker (extruded) floor marks, surface resists marks and smudges and cleans up like new, available in a variety of high-impact colors. L Shape. Brady B-514 is a surface printed polyester with a rigid, clear polyester overlaminate. Brady B-514 is used to mark aisles, passageways, storage locations, and point out safety equipment and exits. Brady B-514 exhibits a dry slip index of 1.0 when tested using an English XL Variable Incidence Tribometer per ASTM / ANSI F1679. B-514 exceeds safety standards for clean, dry non-slip surfaces per ANSI A1264.2-2006 and OSHA 1910.22. Permanent rubber based adhesive type. Not recommended for outdoor use. RoHS Compliant/Lead Free.
- Highly durable, easy to apply, easy to remove
- Compared to conventional floor tape, the ToughStripe "L" corner marks are less likely to be damaged when skids are dragged into their position, as there is less tape on the floor
- Easier to repair - there is no need to pull up and replace an entire line of floor tape
- Made of tough, resilient material so you can spend less time replacing damaged or worn corner marks, you can apply them once, and be done
- Easily removed without damaging the floor or leaving residue; offer the same visibility as painted floor markings, but cost much less
| UPC | 754473162351 |
|---|---|
| ASIN | B0049EMR36 |
| Color | Yellow |
| Model | 104457 |
| Size Name | 10" Length x 4" Width x 0.008" Thickness |
| Brand Name | Brady |
| Unit Count | 20.0 Count |
| Item Weight | 16 ounces |
| Part Number | 104457 |
| Manufacturer | Brady |
| Configuration | 10" Length x 4" Width x 0.008" Thickness, Yellow, 20 Count |
| Material Type | Polyester |
| Item Thickness | 0.01 Inches |
| Adhesive Format | Strip |
| Item Resistance | Impact Resistant, Stain Resistant, Tear Resistant |
| Number of Items | 20 |
| Adhesive Location | Single Sided |
| Adhesive Side Count | 1 |
| Compatible Material | Metal, Plastic, Wood, General |
| Water Resistance Level | Not Water Resistant |
| Lower Temperature Rating | 5 Degrees Celsius |
| Upper Temperature Rating | 54 Degrees Celsius |
| Recommended Uses For Product | Indoor, Industrial |
| Other Special Features of the Product | L Shape |
Bestseller ranking
Fuel System
Customers who viewed this product also viewed
Floor Markers
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form